MODEL 5050P : Tipping Bucket Sensor

General Description:

The Model 5050P Tipping Bucket Rain Sensor is used in the Model 5054TS Rain Gauge Top Section. The sensor is made of hard anodized aluminum. Self-lubricating nylon bearings provide long term operation. The tipping bucket comes with a bullseye level for simple initial installation. A magnetically operated sealed reed switch provides a reliable SPDT digital signal for transmission by the ALERT Transmitter. HydroLynx tipping buckets are warranted for life to the original purchaser.

MODEL 5050P : SPECIFICATIONS

Calibration: 1 mm/tip

Accuracy:

± 3% for 0 to 50 mm/hr. (0-2 in./hr.)

± 2% for 50 to 150 mm/hr. (2-6 in./hr.)

± 5% for 150 to 300 mm/hr. (6-12 in./hr.)

Note: % error shown for calibration point of 128 mm/hr.

Output: SPDT pulse (Form "C").

Can be adjusted to momentary SPST NO pulse output.

5050P
Tipping Bucket Sensor

5050P-MS
Tipping Bucket Sensor with Momentary Switch

5050P-MS2
Tipping Bucket Sensor with Momentary Switch, 2 Wire

5050P-C
Additional Cable, per foot

5050P-CP
Tipping Bucket Sensor with Centering Plate and Three Leveling Screws

5050P-Tip
Funnel Tip